Now we can offer a Devon Larratt Armwrestling Strap, i.e. a wider version of a strap, which is closely associated with Devon, as he uses and promotes this version of Armwrestling Straps. Welcome to visit the product page through the link below to read more and get your hands on one.
Finally, we have been able to refill the stock of our handles. After much hassle, as the parcels with our handles got stuck in Germany for almost two weeks, they finally arrived. So take the opportunity to buy one of our high-quality handles before the stock runs out again 🙂
We apologize that we have been bad at updating our blog, but unfortunately time is a limiting factor. We are happy though that the time is used to pack orders from customers all over the world 🙂
We now sell to both Norway & the UK, which we previously did not do for a period due to complicated regulations and registration requirements. We therefore welcome customers from both of these countries 🙂
Unfortunately, our manufacturer of steel handles has had private concerns (relative who is seriously ill) which affected us in the form of a lack of handles. This is something that was out of our control and we apologize if customers experience a long wait for handles, for example, our Multispinner Handle. Now, however, we have a large load of handles on their way to us. And we’re waiting for these to arrive, so we’ll update the stock as soon as they arrive.
Our popular Devon Larratt Armwrestling Strap 38mm – LUXURY PREMIUM EDITION are unfortunately sold out. Unfortunately, we will not purchase more of them due to the high cost of manufacturing and shipping. HOWEVER, we have happy news, as our manufacturer of regular straps is now also fully occupied with manufacturing Devon Larratt Armwrestling Straps 38mm! This will mean a significantly cheaper strap, with the same wonderful material that our standard straps have. The new straps should arrive within 1-2 months, so keep an eye out in store, you won’t want to miss them!
Do not hesitate to contact us if you have any questions about products or anything else. We are usually extremely quick to answer emails and messages regardless of the day of the week. It is also possible to contact us via Facebook or Instagram. Just search for our store name there, and you’ll find us.
With warm greetings
a part of Armsportstore.com
Our endeavor has always been to be able to offer our customers simplicity at the lowest possible price. That is, a few simple tools to take your training to the next level, without ruining you as a customer. This continues to be our aspiration, as we want everyone to be able to buy training equipment that maintains high quality at reasonable prices. Unfortunately the ongoing inflation has also affected us, as our handle manufacturer is forced to raise prices due to greatly increased purchase prices. We are truly sorry for this but as it is beyond our control, we can only adapt to the situation. We fully understand that not everyone has the financial means to buy expensive training products, but still hope that you notice that we are actually cheaper than everyone else who sells similar handles. Several of our handles are also unique to us, such as our Multispinner and Wrist Wrench Handles, which completely lack sandpaper but still have the same surface as sandpaper without its disadvantages.
We sincerely hope that the current economic situation will change for the better and we will be the first to adjust our prices down if conditions permit. Everything depends on the economic development in Europe and the current instability.
We are proud and excited to see THE G.O.A.T. John Brzenk use our Armwrestling Straps. If our straps are good enough for the world’s best armwrestler of all time, then everyone can be sure that the straps holds the highest quality! Armwrestling Straps – PREMIUM EDITION is our latest version of Armwrestling Straps where we have combined the best strap material with a buckle that makes the strap both easy to fasten and to loosen, even though the durability is higher than all other Armwrestling Straps with plastic buckle that is available on the market.
So if you, like John Brzenk, want to use the absolute highest quality of Armwrestling Straps when you practice, you will find our 5-pack here: : Armwrestling Straps – PREMIUM EDITION (5pcs)
and our 1-pack here: Armwrestling Strap – PREMIUM EDITION (1pcs)
Below you can see the full video where John uses our straps.
Over the years, we have tested different versions of Armwrestling Straps. The problem with Armwrestling Straps is to find a perfect balance with a strap material that is soft and flexible, but still strong enough and not too slippery, so that the buckle is able to lock the strap. This must be combined with a buckle that has high durability and strength, but still have sufficient flexibility to be easy to tighten and loosen. We have tested all possible materials such as plastic, metal, nylon, etc. Every material has their pros and cons. The plastic buckles are available in several different variations based on different compounds and our very first version of Armwrestling Straps had buckles made of plastic of the same type that Mazurenko and other manufacturers use. What we realized was that these do not measure up to our quality demands, as the buckle breaks relatively easily, either from very heavy loads or with frequent use.
We then went over to test metal, which unfortunately was worse in a lot of other ways. Admittedly impossible to break, but incredibly difficult to tighten and loosen and was hard to use. Our next step was Nylon, which we used in the previous version of our Armwrestling Straps, which until now has been the best material for the buckle in our opionion. However, there are some disadvantages with Nylon and it is mainly that they, like the metal buckles, can be perceived as hard to tighten and loosen, even if it´s not as bad as with the metal buckles.
Now we have returned to plastic again, but after extensive searching, we found a plastic buckle made of the right type of plastic compound and with a quality that does not resemble any buckle we have previously tried. The straps are super easy to tighten and loosen, which is positive for all referees around the world :). But despite this, they have extremely high durability and passed our load test for 200kg (~440 lbs) without issues. The buckle broke when reaching 220kg (~480lbs), but didn’t even budge at 200kg (~440 lbs). We have also extended the straps by about 10 cm (~4″) to ensure that there is enough strap left over to tighten even when biggest guys in the world armwrestle.
This ensures that the straps can handle all types of matches, regardless of whether it is heavyweights facing each other or just frequent use during training. Our search is finally over, we have a hard time seeing how we could now create even better Armwrestling Straps.
Are you eager to try our new Armwrestling Straps? You can find our 5-pack here: /product/armwrestling-straps-premium-edition/ and our 1-pack here: /product/armwrestling-straps-premium-edition-1p/
We can guarantee that you will be as satisfied as we are! In addition we offer a 1-year warranty and a 14-day satisfaction guarantee (Read more on the product pages).
As the handles are made of steel, with laser-cut slots for the straps and powder-coated with a special color, the price is higher than on our previous plastic handles. Unfortunately, higher quality and durability means that the price will also be higher. All parts for manufacture the handles cost a lot and we always aim to sell products at the lowest possible price. In this case, however, you get a unique handle that is well worth the money, as everything is of absolute highest quality. If you buy a handle like this, you have a training partner who will be with you for a long time to come.
Unfortunately, we have a limited stock of both types of handles as it costed us both time and money to develop these new handles. But we are working hard to get more handles as soon as possible. If you want to avoid waiting, you should get yours before they are out of stock.
As you have noticed, we have sold out of our Multispinner & Wrist Wrench handles and the products have now been discontinued. This is because our previous manufacturer decided to stop manufacturing products, which is really sad, as the handles maintained a very high quality and have been appreciated by our customers due to the unique grip surface that no one else uses.
BUT we have good news, we are working full time with the manufacturer of our steel handles (Robert Baraban) to produce new versions of these handles with the same excellent grip surface and even better quality, as the handles will be made of steel pipe instead of PVC. This means that longevity and durability increase drastically and we will be able to provide completely unique handles that are not available at any other store in the world.
Unfortunately, it is a time-consuming job to develop new products, so we hope for your patience as we expect to get these new handles during the fall. The manufacturer is currently developing prototypes and after that is completed they will be tested. After the evaluation, there may be some adjustments, for example regarding the painting mixture, etc.
So our hope is to be able to offer these new handles in September (with a little luck, already in August), depending on how much adjustments that needs to be done and different lead times for materials and so on.
We will promote these on our Social Media channels and through our blog when they are available for sale.